home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19950726-19950929
/
000009_news@columbia.edu_Thu Jul 27 14:42:59 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-12-25
|
3KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA12369
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Thu, 27 Jul 1995 12:28:36 -0400
Received: by apakabar.cc.columbia.edu id AA24856
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Thu, 27 Jul 1995 12:28:35 -0400
Path: news.columbia.edu!panix!news.mathworks.com!gatech!news.sprintlink.net!sunic!sunic.sunet.se!newsfeed.tip.net!news.seinf.abb.se!nooft.abb.no!Norway.EU.net!nac.no!nntp.uio.no!news.vu.lt!santaka.sc-uni.ktu.lt!taluri
From: taluri@tauras.vu.lt (Evaldas Taluri)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: using ZMODEM protocol with kermit
Date: 27 Jul 1995 14:42:59 GMT
Organization: LITNET
Lines: 48
Message-Id: <3v88lj$9n0@tauras.vu.lt>
References: <3ttr8v$aci@nlrgup.nlr.nl>
Nntp-Posting-Host: santaka.sc-uni.ktu.lt
X-Newsreader: TIN [version 1.2 PL2]
Apparently-To: kermit.misc@watsun.cc.columbia.edu
One of the possibilities is that kermit is set to 7 bit chars.
Try make kermit transparent to 8 bit chars with set file type binary,
set char-set transparent and similar commands.
berg m. van den (mvdberg@nlr.nl) wrote:
> Hello I'm using ckermit5A(190) on a unix system. This system also
> has rz for zmodem protocol. According to file ckurzsz.ini it is
> possible to use that program. So I "take" this ini file before
> connecting to the BBS. On the BBS I give the command to download
> a file with the ZMODEM protocol (this BBS doesn't support kermit).
> After starting the transfer I return to the local kermit and enter
> the rz command. This is what happens:
> C-Kermit>rz
> rz ready. To begin transfer, type "sz file ..." to your modem program
> Incoming: flora.zip 88599 5377444470 100400
> Receiving flora.zip BIN w
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> Retry 0: Garbage count exceeded
> Retry 0: Garbage count exceeded
> Retry 0: Garbage count exceeded
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Bad CRC
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> Retry 0: Garbage count exceeded
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> 0 ZMODEM CRC-32 Retry 0: Data subpacket too long
> C-Kermit>
> You see nothing is to be transferred. What is wrong ?
> What kind of configuration should I use?
> BTW. I connect to this BBS via telnet to an outcall modem
> connected at a cisco 500-cs.
> Greetings,
> Meindert van den Berg.